Function: | Flow Control |
---|---|
Installation: | Cover Plate |
Drive: | Electric |
Type: | Directly Operated Type |
Working Pressure: | 0.02 MPa - 0.8 MPa |
Flow: | 3L/Min |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Normally Open Miniature Water Solenoid Valve
Normally Open Miniature Water Solenoid Valve usually be used in water purifier for water inlet and waste water control through 12V 24VDC 110V 220VAC direct current to control the on and off of valve. Using with the high or low pressure switch or mini computer control box to rule the the electronic parts to reach the function that water flowing is up to the power. It can control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/4" (Nominal non-taped National Pipe) outlets. Normally, the valve is open. When 12V 24VDC 110V 220VAC is applied to the two terminals, the valve closed and water can be stopped. The valve has a gasket arrangement inside, so there is a minimum pressure requirement of 0.02 Mpa (3 PSI). Also, liquid can only flow one direction.
1/4" Nominal quick connector
Working Pressure: 0.02 Mpa - 0.8 Mpa
Working Temperature: 1 ºC - 75 ºC
Response time (open): ≤ 0.15 sec
Response time (close): ≤ 0.3 sec
Actuating voltage: 12V 24VDC 110V 220VAC 50/60Hz
Actuating life: ≥ 100000 cycles
Weight: 100g
Suppliers with verified business licenses